Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lost their keys to their vehicle may be concerned about the expense and inconvenience of adding an additional key. You can avoid these expenses by making your own key fob.
To do this, you'll need a flathead screwdriver. Place the flathead screwdriver into the slot located at the middle of the case and then slowly open it.
Cost
Some used cars have only one key, whereas most SAABs come with two keys. In this case the owner will need to purchase an additional key, which could be costly. There are many options to cut costs in this process. If you're only looking to replace the key fob case and not the badge or emergency key, you can save some money by buying a used case from a dealership. These cases do not include the emergency badge or key, and are prone to wear out fast.
It is also necessary to pay for the installation and programming of the TWICE module. These costs can quickly become expensive particularly if there is no spare key.
In this regard, it is vital to have two keys for your vehicle. In this way, if you lose the only working key you won't end up without a means of transportation.
The good news is that adding another key to your Saab 9-3 doesn't have to be as complicated as it might seem. The only major problem with this is that the key needs to be linked to your car's computer. This can be done through a dealer, but it can take some time to schedule an appointment. You can find all the information you need on the internet to guide you through the procedure.
Installation
Most Saab vehicles manufactured after 1995 feature an immobilizer system which uses a key fob to control the engine. This system also controls the remote and door locks for the car. saab keys replacement is important to have a spare key available to prevent losing the original and having your car stolen. If you lose your primary Saab working key, there are many ways to replace it, without having to pay for costly dealer service.
First, you need to make the new key fob. It is done by using a flathead screwdriver in order to pry the case open. Simply insert the screwdriver into a small hole in the middle of the case. Then gently work it. If you're having trouble, try using different angles. After you've opened the case, remove the electronics and place them into a brand new fob case.
You are able to begin the programming process after you have the replacement key and fob. You will need to connect your Tech2 and then follow the steps for NG 9-3 either with or without the transponder. It is recommended to get a replacement TWICE that is already connected to the correct key by using transponders. You can locate this unit online. However, you should be sure to use an OEM replacement.
Programming
In general, adding an additional key for the Saab 9-3 will require an additional tool called a Tech 2. It also involves programming the car to recognize the new key. This is a more complex process than simply copying a metal key. It should be handled by a professional so as to not damage the electronic system of the vehicle. If you're thinking about adding the spare key to your car, it's best to get it done as soon as possible. In the event of delay, it could result in higher costs in the future.
You'll also have to replace either the TWICE or CIM modules. This is a mail-order process and cannot be do through an aftermarket supplier. Based on the model of your car it could cost quite high.
There's an alternative to the dealer who will charge you top dollar to replace the car computer. S.A. Locksmith & Security will RE-Program your Saab computer to prepare it for the new key. This will reduce the expense of purchasing a brand new car computer. This service is quick, simple and inexpensive. You will save as much as 50% on what a dealer would charge you. This is an excellent solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is among the most unique cars ever to sport the Saab badge. It was a Scandinavian, front-drive fighter jet-inspired beast that was fast as hell and fun to drive. While a variety of other Saab models followed it, very few were as original.
If you have a Saab 9-3 vehicle and lose your key fob, you need to replace it as quickly as possible. Saab vehicles come with an immobilizer system that requires a special key to activate. The replacement process is fairly simple if you have an extra key, however it can be costly and time-consuming if you don't have a spare.
You can save money if you purchase an used key fob replacement and have it programmed locally by locksmiths. But, be wary of purchasing used keys on eBay or other online retailers. They may not be authentic and you could pay more at the end.
The removal of the battery and electronic components from the old key fob is an easy procedure that anyone could do using a screwdriver with a small flathead. Be cautious not to damage the small electronic components inside the case. It is also important to avoid putting liquids on the inside of the case since it could cause damage. Also, avoid buying duplicate keys from aftermarket sellers, as they may not be paired with the CIM of your car.